Predator 79cc Harbor Freight SS NPT Threaded 3/4 Exhaust adaptor.

Description

Engine not included.
-This adapter will work on the
, Predator 79cc 3HP from Harbor Freight (
DO NOT ORDER IT IF YOU HAVE ANOTHER BRAND OF ENGINE, IT DOES NOT MATTER THAT THEY ARE 3HP, IT WILL NOT WORK
)
You can put a 3/4 pipe line buying at home depot to get the engine gases out of your garage or any other closed places.
NPT Threaded 3/4   Exhaust Flange.
Please understand that the thread is made of stainless steel, the exhaust flange is made of mild steel.
2 Lock washer and 2 nut included..
1/4"
thick
flange,
wall heavy duty MILD STEEL.
length:
2" long
SS 3/4 NPT Thread.
Good for: Mini bikes, go karts, generators...
multipurpose.
Fit in the following engines ONLY
: Predator
79CC (3HP
) Harbor Freight,
mounting holes 1.82"
center to center
please check the measurements of your engine before you buy.  (see photos for details)
*Free shipping 1-4 business days. ON U.S.A.
*INTERNATIONAL CAN TAKE 30 DAYS!
Made in U.S.A.
We only ship to paypal confirmed address.
Florida residents pay 7% taxes.
Finding the Correct Pipe Thread Size
National Pipe Threads (NPT)
Pipe sizes do refer to physical dimensions, but the plumbing industry standard for the sizes of pipe is not always as straight-forward as measuring the pipe.
Measuring the pipe will oftentimes mislead you into choosing the wrong pipe, so do take care.
The "pipe thread size" as shown in column 3 of the table below is measured and based on the inside of the pipe. But, to actually determine the size of a pipe, the outside diameter of each pipe or fitting must be measured and compared to the table for size identification. For example, a 3/4" NPT pipe thread has an outside diameter of 1.050 inches. Each thread size has a defined number of threads per inch (TPI). The 3/4" NPT pipe thread has 14 threads per inch. Both the TPI (threads per inch) and OD (outside diameter) of the thread are required for positive identification of thread size because several sizes have the same TPI.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please check my other Header (on other audition)