Hilti DX36 M62 Powder-Actuated Fastening Tool, Fasteners, Load Strips, Accs.

Description

This gun was a reliable tool for me and functioned  well.   I bought this new in 1990 and I am the only user.
Hilti DX36 M62 Powder-Actuated  Fastening Tool, Case & Instructions
Cleaning Brushes (3)
Hilti DX-36M Shear Clips (3)
Rubber Stabilizer
Hilti Spray Lubricant - Not  included; See Notes  below
Includes over 1100 Fasteners(see photos)
listed below:
Masterset Fasteners to fit Hilti  Tools
#27 - 369 pcs,   8mm head x 1" length
#19K - 359 pcs,  8mm head x 5/8" length knurled
#22 - 100 pcs,  8mm head x 3/4" length
#52 - 173 pcs,  8mm head x 2" length
#62 - 100 pcs 8mm head x 2 1/2" length
Partial box of Hilti Brand  Fasteners #62 - 33 pcs 8mm head x 2 1/2" length
Approx. value total on fasteners
If up want them, price can also  include about a"1000" 27 caliber strip loads (see photos & list below)
at no extra cost other than shipping.  The load strips  may no longer  fire. Even when they were new some of them would not fire. These have been  stored for probably 30 years inside the house but have not been tested  but use them is at your own risk.
I
f you want these loads they will be shipped separately "ORM" by UPS.  Buyer will pay cost of shipping.
33 strips x 10 - Masterset 27SL3 Green Power Level (330)
28 strips x 10 - Masterset 27SL4 Yellow Power Level (280)
56 strips x 10 - Hilti  #5 Red  Power Level (560) - This was the highest power load; normally too high.
TIP
:  The fasteners  need just enough power to set them fully. There is an adjustment screw above   the handle that allows fine tuning when you are doing repetitive shots. If all  the way down is too rough (too much power) then go to softer load (lower power).
TIP:
The Hilti Spray in the  picture would no longer spray. It also left a sticky residue as it drieswhich in turn catches ash from the shots.  I cleaned the gun today with  BreakFree gun lube/cleaner but there is still evidence of the ash build up inspots. If you clean upon arrival the BreakFree may have loosened the ash sot  hat it easily wipes off.
The gun seems to work normally,but I forgot to shoot it before I cleaned it.
Upon buyers request I will still  shoot it before it ships if you desire, but won't clean it again.