Han Solo DL44 1:1 3D Printed Parts Kit & Build Guide! Airsoft & Denix Available

Description

---This is not a complete blaster---
This is a full parts kit for building your very own DL44. Please read completely!
I will no longer accept returns from those who failed to read the ad---
For sale is a complete parts kit to build your very own replica of Han Solos DL44 blaster.
There are no affordable, accurate replicas of the DL44. After giving up on trying to buy one, I decided to hop on my computer and design one myself. Now I'm happy to make these kits available to other builders.
These parts are 1:1 replicas based on the Dark Energy Creations ANH machined kit. Some have been slightly modified to accommodate the 3D printing process, but I tried to keep everything as accurate as possible. Key differences will be things such as the screw types and the bull barrel, which sacrificed some prop accuracy for more Mauser/base gun compatibility.
I test fit each part before shipping them out. Sometimes imperfections or blemishes can occur that I correct for you, so if you see a sanded spot on one of your parts don't worry! It's intentional.
Whats Included:
10-Page Assembly & Prepping Build Guide
Parts:
Scope
Scope Rings
– x2
Scope Adj. Knob
Scope Adj. Knob Mount
Scope Mount
Scope Mount Rings – x2
Scope Mount Crossbar
Scope Mount Spacers – x2
Scope Mount Outer Nuts – x3
Side "Mystery Disk"
Front Heat Sink/Grille (See below)
Bull Barrel Adapter (See below)
Flash Hider
Screws:
4x Scope Mount Ring Screws
2x Scope Mount Screws
3x Crossbar Mounting Screws
2x Adjustment Mount Screws
1x Flash Hider Hex Screw
-- This does NOT include a base Mauser pistol --
What Mausers will this work on?
----Bull barrel and heat sink---
I designed this to work with an affordable airsoft Mauser made by Double Eagle (pictured above) that can be found here on eBay for ~. However, this will work with other
airsoft Mausers (WE, HFC, UKArms, etc.). Depending on your model however, the bull barrel adapter may require modification to fit correctly.
A lot of different Mauser replicas exist. All with their own slightly different dimensions. I tried to make the bull barrel as spacious and universal as possible.
Your barrel has to removed (Double Eagles have removable barrels) or it has to be cut down to the correct length.
If you are using a "traditional" sized C96 (such as a Denix) the heat sink will NOT fit. If you are using a Denix, I have Denix sized heat sinks available. Just message me after purchasing and I will include the correct one instead for no extra charge.
Note!:
Some new low-cost Mausers have been coming out that are NOT 1:1 scale. These are usually the full-metal ones that are ~, such as the UKArms G12. These are actually ~3/4 scale and my kit will not fit these. If available, look for overall length in the description. A correct 1:1 Mauser is ~11 inches long. the 3/4 scale ones are usually ~9 inches long.
The following Mausers are compatible with my kit:
(P)=Plastic, (M)=Metal
-Double Eagle M32 (P)
-UKArms M32 (P)
-KWC M712 (M)
-HFC "Box Cannon" (M)
-WE-Tech M712 (M)
-Umarex "Legends" C96 (M)
-Denix C96 (M) - Alternate heat sink needed
If you are unfamiliar with 3D printed parts:
All parts are now printed with new, high strength 3D APLA+. A much nicer, stronger alternative to ABS. They require minor sanding or filing prior to being painted. There are some light surface blemishes that are naturally associated with printing, such as the "stitch line" where the next layer starts. This is normal when it comes to 3D printing and is not a lack of quality!  The shape of some of these pieces makes it very difficult for most printers to accomplish and is just a byproduct of the parts shape.
If you have any other questions please feel free to ask. Thank you very much!