GY6 Stator Upgrade 11-pole 12.5amp Plug-n-Play Complete Magneto Kit

Description

FREE SHIPPING.  GY6 11-POLE STATOR KIT (12.5a verified) + AMERICAN MADE
🇺🇸
PLUG-N-PLAY ADAPTER
Connectors and fuse holder are
3D printed
with
Polyethylene Terephthalate Glycol (PETG)
plastic for strong UV resistance
.
And more material has been added where possible to beef them up compared to original connectors.
Original nylon connectors commonly crumble and fall apart after a season or two of sun exposure.
PETG
plastic is approximately as strong as nylon brand new, but keeps that strength over time despite frequent sun exposure.
VERIFIED 12.5 AMPS OUTPUT!
There are many versions of these parts out there of different quality and performance.  Other places don't test their products, and don't know what they're sending you.  The SUPERGY6 11-pole stator, flywheel, and rectifier together generate up to
12.5 amps of DC electrical capacity, whoa!
Ask the other guys what their charging systems can do, they don't even know!
This is awesome lighting and charging boost when compared to the approximate 5 amp output of a stock 6-pole GY6 stator.  This SuperGY6 kit charges your battery at 13.5v - 14.5v under moderate electrical loads, and charges at 13v when fully loaded at the rated idle wattage.
160 MAX WATTS AT IDLE (13V MINIMUM)
160w for all your LED light bars, radios, audio systems, and other accessories.  The available power increases with engine RPM, but you should plan your lighting with the wattage available at idle so your battery won't drain while you're at a stop.
NO REWIRING! SUPER SIMPLE PLUG-N-PLAY INSTALL
No rewiring is needed with the new included adapter harness. Absolutely NO modification to the engine wiring harness or rewiring needed. The red ring goes to the post on your solenoid (battery side), and the black ring goes to ground on one of the CVT cover bolts.
Note for scooters:  If your starter solenoid is located far away from your engine/stator, ask about an extension for this kit before buying.  Thank you.
Yes, this can be used with both AC ignition and DC ignition systems!
Don't forget a flywheel puller (M27 x 1mm reverse thread)
get your original stator off.
Three-jaw pullers won't work, they'll just bend the flywheel around the outside.
Stator generates three-phase power which produces flat and consistent 12v DC output after rectification and regulation. Smooth regulated charging promotes long battery and bulb life.
Have a YERF DOG SPIDERBOX?
If you are installing the 11 pole stator upgrade on a Yerf Dog GX150 or other model with no headlight switch (that runs headlights directly from the stator), you must install a toggle switch to run your headlights after the 11-pole upgrade.