Go Kart Wheels & Tires, Radio Flyer Wheels, New Wheels & Used Tires, American

Description

For sale on a 'Buy it Now', is a pair of two (2) Go kart wheels and tires. We have several sets available and the pictures will be representative of what you will receive. We also have wheel hub options available for extra cost.
Equipment Description:
Wheels;
Are new aluminum construction. The are a gorgeous high polish finish. They are also American pattern wheels. Wheels are front wheels and are 5" wide with a 2.5" inset.
Wheel Pattern Descriptions:
American pattern hubs and wheels have a three bolt pattern on a 2.5" circle. The hole in the center of your wheels will have a 1.75" size if it is American pattern. Another check to see if you have an American pattern wheel or wheel hub is to measure between neighboring stud holes. You will get approximately 2.125" c/l to c/l on an American wheel.
American wheels or hubs are drilled for 1/4" studs and nuts. Most American pattern hubs also have a set of 5/16" tapped holes for bigger studs and nuts. We do not provide the 5/16" hardware, and if you use this size you'll need to drill out your wheels to fit.
A metric wheel will have a 1.5" center hole (40 mm to be exact) and a smaller spacing on the studs. The c/l measurement on neighboring stud holes will be closer to 1 15/16" on the metric wheel or hub.  The metric wheels and hubs also have a three bolt pattern that is on a 58 mm circle.
The metric hubs and wheels will be drilled for 8 mm studs and nuts.
Tires;
are used MG brand, Red compound. Tire size is 4.6/10-5 Tread is in the 50% range.
Optional Wheel Hub Sets;
Front Wheel Hubs;
this option is for two (2) front wheel hubs. All have bearings in and all will spin. The bearings have a 5/8" I.D. This option is for the Radio Flyer Wagon trailer, hose reel, BBQ grill, or whatever gets pushed or pulled. The hubs are American pattern to match the wheels.
1" Rear Drive Hubs;
This option has two (2) rear drive hubs with American bolt pattern and 1" bore. The hubs include a 1/4 slot for a drive key, which is not included. This would be an option for something with an engine and rear drive wheels.
1.25" Rear Drive Hubs;
This option has two (2) rear drive hubs with American bolt pattern and 1.25" bore. The hubs include a 1/4 slot for a drive key, which is not included.
This would be an option for something with an engine and rear drive wheels.
Radio Flyer axle adapters and Front Wheel Hubs;
this option is for two (2) front bearing wheel hubs and two (2) Radio Flyer axle adapters. Most coaster wagons have a 1/2" diameter axle that needs an adapter to fit the go kart front wheel hubs with the standard 5/8" I.D. bearing. The hub in turn adapts the wheel to the wagon. The adapters slide over that axle and setscrew in place. The hubs then slide on and are fastened with a provided lock nut. It may take less time to add your go kart wheels, hubs and adapters to the wagon than taking the original equipment wheels off.