EBA TA 4-400 F High Capacity Shredder, 6mm Strip Cut, Conveyor Fed, 4kW, 5HP

Description

EBA TA 4-400 F High Capacity Shredder, 6mm strip cut, Conveyor Fed, 4kW, 5HP
This is a used EBA TA 4-400 F high capacity shredder. It cuts data carriers into 6mm (or just under 1/4") strips. The unit is conveyor fed and can also shred items such as floppy discs or CD/DVD. The rear chute has a bag clamp so you can fill up a bag with your shreds, or you can route into a container. The unit is in good condition with a few scratches from storage and use. This unit has an oiler for lubricating the blades, ensuring lasting use and life of the blades.
The security level of this shredder is P-2 according to DIN-66399
, recommended for data carriers with internal data, which have to be made illegible.
Model: TA 4-400F
Shred Width: 6mm
Volts: 208
Amps: 16
Phase: 3
Hz: 60
Input: 4.7kW
Output: 4.0kW
Control Voltage: 24V
HP: 5
About 75-110 sheet capacity
Opening: 15" wide, 4 1/2" tall
Security Level: DIN-P2
DIN Protection Class: 1
Security rating: Very low
Strip size: < 800 mm² / 1.24 in²
Strip width: < 6 mm / 0.24 in
Strip length: Unlimited
After shredding an A4 document: 35 strips
Specifications:
MFG:       EBA
Model:     TA 4-400 F
Serial:
Volts:
Amps:
Phase:
Year:
Drive:
Controls:
Manuals:
Air:
Weight:   695 Lbs
Condition:
Length:   64
Width:     34
Height:    44
All dims inches unless otherwise noted
Inventory #: 8463
Location:
WE SHIP INTERNATIONALLY
contrary to the Ebay
statement
that says we only ship to united states.
Contact us for shipping quotes
International purchases: A documentation processing fee will be added to total purchase for items under 0.
Our company return policy is that our description is guaranteed and we will accept returns in the event an item is mis-described.
When communicating with us please use your own email address.  We want to know who we are communicating with and we cannot identify specific emails in our inbox using the ebay email system.
Send emails to heritageequipment AT gmail . com
The new ebay buyer protection program has inspired us to offer all of our items “as-is”.
This does not mean that you are buying a machine with deficiencies, known or unknown.
What it means is that some of our items will be tested and will include the results in the description and others will be untested but described accurately to the extent that is possible without actually powering up the machine.
In addition to this written description you will have the opportunity to view high quality photos of the item.
With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Feel assured that we will make a diligent effort to give you an accurate description of the equipment.
As a buyer you should be aware that you are buying an expensive piece of equipment at a greatly reduced price and as such you may have to deal with certain unknowns and defective components which were not known and could not be known without full scale setup and operation of the machine.
Our experience in dealing with many specialized pieces of equipment has proven this to be a rare occurrence however it is a risk inherent in buying used equipment.
The very few times we have had to deal with these issues we have been very helpful in resolving the problem.